Download
Share
Print this page
  1. Manuals
  2. Brands
  3. ROBAND Manuals
  4. Commercial Food Equipment
  5. Haellde RG-250 diwash
  6. User instructions

ROBAND Haellde RG-250 diwash User Instructions

Vegetable preparation machine
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
USER INSTRUCTIONS
VEGETABLE PREPARATION MACHINE
RG-250 diwash
Made in Sweden. Exclusively distributed and serviced in Australa by Roband Australia Pty Ltd.
All standard Hällde products are designed to run at 230V per phase, 50Hz.
All specifications are nominal only. All information contained in this instruction is subject to change without notice
due to constant research and development. AB Hällde Maskiner reserves the right to make changes to machines,
accessories and cutting tools.
Roband Australia Pty Ltd
All care has been taken to ensure correct information at time of printing. AB Hällde Maskiner
1 Inman Road,
accepts no responsibility for printing errors.
Cromer, NSW 2099
Australia
Tel: +61 2 9971 1788
www.roband.com.au
robandaustralia
Fax: +61 2 9971 1336
Email: sales@roband.com.au
042022

Advertisement

loading
Need help?

Need help?

Do you have a question about the Haellde RG-250 diwash and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ROBAND Haellde RG-250 diwash

Summary of Contents for ROBAND Haellde RG-250 diwash

  • Page 1 VEGETABLE PREPARATION MACHINE RG-250 diwash Made in Sweden. Exclusively distributed and serviced in Australa by Roband Australia Pty Ltd. All standard Hällde products are designed to run at 230V per phase, 50Hz. All specifications are nominal only. All information contained in this instruction is subject to change without notice due to constant research and development.
  • Page 2 RG - 250 VEGETABLE PREPARATION MACHINE ASSEMBLING MANUAL FEEDER PARTS / ASSEMBLING PESTLE CLOSE FEED CYLINDER DECORING DEVICE OPEN CUTTING TOOL ALWAYS USE! EJECTOR PLATE MACHINE BASE ASSEMBLING FEED CYLINDER...
  • Page 3 FITTING THE CUTTING TOOLS USING THE FEEDERS RG - 200 RG - 250 RG - 250 diwash Decoring device FITTING THE EJECTOR PLATE Cutting tool ALWAYS USE! Ejector plate Knife house WRENCH Decoring device STACKING PRODUCTS Slicer TUBE FEEDER Dicing grid ALWAYS USE! Ejector plate...

  • Page 4: Installation

    USER INSTRUCTIONS ASSEMBLING Check that the machine cannot be started with THE MANUAL FEEDER ERGO LOOP HALLDE plate lowered. RG - 250 clockwise as far as it will go (into the locked position). taking the machine into operation. Grip the push feeder with both hands and insert ( GB ) the shaft end into the mounting on the machine.

  • Page 5: Troubleshooting

    CLEANING IN A DISHWASHER: All removable isolating switch is closed. Check that the feed parts of the RG-250 diwash are dishwasher safe. Never use a dishwasher that has granules in the correct position. Move down the pusher or uses similar forms of treatment. fuses in the fuse box for the premises have washing detergents with low chlorine content.
  • Page 6 RG FP VPU-250 / RG-250diwash...
  • Page 7 RG FP VPU-250 / RG-250diwash...

  • Page 8: Declaration Of Conformity

    Food Preparation Machines Food Preparation Machines Made in Sweden Made in Sweden DECLARATION OF CONFORMITY AB Hällde Maskiner SUPPLIER P.O. Box 1165, SE-164 26 KISTA, Sweden ADDRESS DECLARE UNDER OUR SOLE RESPONSIBILITY THAT THE FOLLOWING PRODUCTS: RG-50S, RG-50, VPU/FP-50, RG-100, VPU/FP-100, FP-150, RG-200, MODEL NAME VPU/FP-200, RG-250 diwash, VPU/FP-250 diwash, RG-250, VPU/FP-250, RG-7, RG-350, VPU/FP-350, RG-400, VPU/FP-400, RG-300i, VPU/FP-300i,...