Remove This machine contains no user-serviceable parts. any glue residue from the protective plastic or Roband Australia, our agents, or a similarly tape using citrus cleaner. qualified person(s) should carry out repairs. Place the product on a firm, level surface in the Keep cord away from heated surfaces.
Bain Marie has reached temperature. TROUBLESHOOTING OPERATION – WET If the Bain Marie does not function check the Models: BM1, BM2, BM21 & BM4 following points before calling for service.
✓ The machine is plugged in correctly and the ES0367 Wiring Set - BM1, BM2, BM4 power switched on. HC0148 Element - 670W 230V ✓ The power point is not faulty. TS0021 Energy Regulator & Knob ✓ The on/off switch is not in the OFF position.
Tubular Heating Elements is not a warranty fault. Roband or any subsidiary company or Agent shall not be liable for loss of profit or damage to other equipment and property except where it is in breach of the guarantees provided in accordance with applicable legislation.
Need help?
Do you have a question about the BM1 and is the answer not in the manual?
Questions and answers