Table of Contents
Advertisement
In non-incendive installations, check to ensure all electrical connections are made to
approved circuits which meet local and jurisdictional installation codes.
Verify that the markings on the label are consistent with the application.
Verify that the air supply pressure cannot exceed the marking on the label.
Model Number Description of SVi1000
The SVi1000 model numbers approved for the use in potentially explosive atmospheres are shown in
the following table. Model codes are:
SVi1000 abc
Where:
a = none, SW or PR
b = none or G
c = none or IM
MODEL
SVi1000
SVi1000 /SW
SVi1000 /G
SVi1000 /SW/G
SVi1000 /IM
SVi1000 /G/IM
SVi1000 /SW/IM
SVi1000 /SW/G/IM
SVi1000 /PR
SVi1000 /PR/G
SVi1000 /PR/IM
SVi1000 /PR/ G/IM
Classification Specific Requirements
4.1 Class I Division 2 (Non-Incendive Equipment)
Explosion Hazard Warning: Do not disconnect equipment unless power has been switched off or the
area is known to be non-hazardous.
4.2 Group II Category 1 (Zone 0)
Copyright 2018 as an unpublished trade secret. This document and all information herein is the property of Dresser LLC. It
is confidential and must not be made public or copied and is subject to return upon demand.
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
DESCRIPTION
SVi1000 Assembly
SVi1000 Assembly with switches
SVi1000 Assembly with gauges
SVi1000 Assembly with switches and gauges
SVi1000 Assembly with integrated magnet
SVi1000 Assembly with gauges and integrated magnet
SVi1000 Assembly with switches and integrated magnet
SVi1000 Assembly with switches, gauges, and integrated
magnet
SVi1000 Assembly with position retransmit
SVi1000 Assembly with position retransmit and gauges
SVi1000 Assembly with position retransmit with integrated
magnet
SVi1000 Assembly with position retransmit, gauges and
integrated magnet
ES-761 Rev H
GE Oil & Gas
Page 5 of 13
Masoneilan SVi1000 Positioner Quick Start Guide =| 77
Advertisement
Table of Contents
