GE BAKER HUGHES Masoneilan SVi 1000 Quick Start Manual page 23

Tools required:
To mount the SVi1000:
1. Attach the mounting bracket to actuator (Figure 9).
Mounting
Bracket
Long Side
Flat Head Socket Cap Screw, 5/
16"-18UNC X 0.62" Long
2. Bolt the extension shaft to the valve position take-off shaft (Figure 10).
Magnet
Holder
Assembly
Extension
Shaft
Valve Position
Take Off
Shaft
Figure 10 Extension Shaft to the Valve Position Take-off Shaft
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
M5 Hex Key
M3 Hex Key
Valve Position Take
Off Shaft
Figure 9 Rotary Mounting Bracket to Valve Actuator
M4 Hex Key
Mount the long end of the mounting
bracket to the left when facing the
actuator, if possible.
Masoneilan SVi1000 Positioner Quick Start Guide =| 23
Mounting
Holes
Tighten the
M4 screw
(one shown)
Install with a
flat head socket
cap screw,
1/4"-28 UNF