Safety Warnings • For traffic safety, do not use earphones while driving or cycling. Damage • Please inspect the unit for damage after unpacking. • Do not continue to operate the unit if you are in any doubt about it working normally, or if it is damaged in any way - switch off, unplug from the mains socket and consult your dealer.
Page 5
Earphones • Listening to loud sounds for prolonged periods of time may permanently damage your hearing. • Before putting on earphones, turn the volume down then put the earphones on and slowly increase the volume until you reach a comfortable listening level.
Thank you for purchasing your new product. We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers. You will also find some hints and tips to help you resolve any issues. Read all the safety instructions carefully before use and keep this instruction manual for future reference.
Product Overview Headphone 1. Status indicator 5. AUX IN socket Connect the 3.5mm button audio cable with • Increase volume music players or • Go to next track mobile phones. button 6. Microphone • Call function 7. ON/OFF Switch • Bluetooth pairing •...
Charging the Battery When using the unit for the first time, charge it fully first. 1. Connect the USB charging cable to the earphones. 2. Connect the other end of the USB charging cable to a powered USB device. Status Battery Indicator Low battery The Status indicator will light up red.
Switching On/Off To switch on, switch the ON/OFF switch to ON position, then press and hold until the status indicator lights • If the earphones are already paired with a Bluetooth device before, it will automatically connect with the last paired device when both are in pairing mode. To switch off, press and hold until the status indicator lights up for few seconds.
5 minutes, the headphones will switch off. 4. Activate the Bluetooth feature on your Bluetooth device and start searching. Then select “GLITOBT18”. 5. If necessary, enter the passcode, “0000”, to pair and connect the earphones. Some device also ask to confirm the headset connection after paring.
Operation If you receive or make a call while listening to music, the music is paused until you end the call. Press Increase volume repeatedly as desired Decrease volume repeatedly as desired Call Functions Answer / end a call once Reject a call Hold 2 seconds then...
Operate with Audio Cable Multifunction Button Press Button Playback Functions Multifunction once Answer / end a call Hold Multifunction for 2 Reject a call seconds then release Playback Functions Multifunction once Play / pause track Multifunction twice Skip to next track •...
Hints and Tips Product not working: • Recharge the product. • Ensure the product is switched on. • Ensure your Bluetooth-enabled device’s wireless function is active. • Ensure there are no other wireless devices in discovery mode. • Move the product closer to the device. •...
Specifications Model GLITOBT18 Sensitivity 107±3 dB Impedance 32 Ω Rated Input DC 5V 0.5 A Frequency Response 20 Hz – 20 kHz Frequency Band(s) 2400 – 2482 MHz Max. Radio Frequency 7 dBm Power Transmitted Bluetooth Interface Bluetooth 4.0 Bluetooth Profiles...
Page 15
For general information about this appliance and handy hints and tips, please visit: www.TeamKnowhow.com/discover or call 0344 561 1234 Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day.
Page 16
DSG Retail Ltd. (co. no. 504877) 1 Portal Way, London, W3 6RS, UK EU Representative DSG Retail Ireland Ltd (259460) 3rd Floor Office Suite Omni Park SC, Santry, Dublin 9, Republic of Ireland IB-GLITOBT18-190507V2...
Need help?
Do you have a question about the GLITOBT18 and is the answer not in the manual?
Questions and answers