Safety Warnings • For traffic safety, do not use earphones while driving or cycling. Damage • Please inspect the unit for damage after unpacking. • Do not continue to operate the unit if you are in any doubt about it working normally, or if it is damaged in any way - switch off, unplug from the mains socket and consult your dealer.
Page 5
Earphones • Listening to loud sounds for prolonged periods of time may permanently damage your hearing. • Before putting on earphones, turn the volume down then put the earphones on and slowly increase the volume until you reach a comfortable listening level.
Thank you for purchasing your new product. We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers. You will also find some hints and tips to help you resolve any issues. Read all the safety instructions carefully before use and keep this instruction manual for future reference.
Product Overview button button • Increase volume • Decrease volume • Go to next track • Go to previous track button 4. Microphone • Call function 5. Charger connector • Bluetooth pairing 6. Status indicator • Audio playback...
Charging the Battery When using the unit for the first time, charge it fully first. 1. Connect the USB charging cable to the earphones. 2. Connect the other end of the USB charging cable to a powered USB device. Status Status Indicator Low battery The indicator will flash in red slowly.
Switching On/Off To switch on, press and hold until the blue indicator lights up once. • If the earphones are already paired with a Bluetooth device before, it will automatically connect with the last paired device when both are in pairing mode. To switch off, press and hold until the red indicator lights up once.
Bluetooth Pairing 1. Ensure the earphones is switched off. 2. Press and hold for 3 seconds to enter Bluetooth pair mode. The status indicator starts flashing in red and blue rapidly and alternately. If no Bluetooth device is paired within 3 minutes, the headphones will enter standby mode.
Operation If you receive or make a call while listening to music, the music is paused until you end the call. Press Increase volume repeatedly as desired Decrease volume repeatedly as desired Call Functions Answer / end a call once Reject a call Hold 2 seconds then release...
Reset the Headphones Connect the USB cable to a charging source, the indicator will light up red. Press and hold until the status indicator flash in blue. The hardware is now reset. Hints and Tips Product not working: • Recharge the product. •...
Specifications Model GTCNBPM19 Sensitivity 94 dB (1 kHz) Impedance 30 Ω Rated Input DC 5V 500 mA Frequency Response 20 Hz – 20 kHz Frequency Band(s) 2400 – 2482 MHz Max. Radio Frequency 3 dBm EIRP Power Transmitted Bluetooth Interface Bluetooth 5.0 Bluetooth Profiles A2DP, AVRCP, HFP, HSP...
Page 14
For general information about this appliance and handy hints and tips, please visit: www.TeamKnowhow.com/discover or call 0344 561 1234 Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day.
Page 16
DSG Retail Ltd. (co. no. 504877) 1 Portal Way, London, W3 6RS, UK EU Representative DSG Retail Ireland Ltd (259460) 3rd Floor Office Suite Omni Park SC, Santry, Dublin 9, Republic of Ireland IB-GTCNBPM19-180410V1...
Need help?
Do you have a question about the THE COLLECTION PRO GTCNBPM19 and is the answer not in the manual?
Questions and answers