SATO MB200I Product Manual page 3

DISCLAIMER
MB and its associated nomenclature (MB200i, etc.) are trademarks of SATO Corporation. Other
product and corporate names used in this publication may be trademarks or registered trademarks of
other companies, and are used only for explanation and to their owner's benefit, without intent to
infringe.
SATO has made a good faith effort to present the most accurate and timely information available.
Competitive information contained in this publication is based on public data sources available at the
time of publication. SATO shall not be responsible for any inaccuracies or omissions in this
information, including, but not limited to, information obtained from other companies' publications, the
press, and other third party organizations.
All information in this publication is subject to change without notice, and does not represent a
commitment on the part of SATO. No part of this manual may be reproduced for any purpose or in
any form, including electronic storage and retrieval, without the express permission of SATO. Content
with this document should be considered confidential and should not be distributed to any third
parties. This document is intended solely for the use of SATO agents and its representatives.
©2006 SATO Corporation. All rights reserved.
www.satoamerica.com www.satoamerica.com www.satoamerica.com www.satoamerica.com
3