Replace A Bgw320-505 Indoor Ont - Nokia ONT BGW320-505 Product Manual

Install or replace a BGW320-505 indoor ONT

Replace a BGW320-505 indoor ONT

505 ONT connections" (p.
b. Press the Reset button for less than 10 seconds to reboot the ONT.
Press the Reset button for 10 seconds to reset the ONT to its factory defaults.
E
ND OF STEPS
4.5 Replace a BGW320-505 indoor ONT
1
Deactivate the ONT services at the P-OLT.
If you are using the SLID feature, this step is not required. The ONT and the services can
remain in service (IS).
a. Use the RTRV-ONT command to verify the ONT status and th associated services. Record
the serial number or the SLID of the ONT displayed in the command output.
Example:
RTRV-ONT::ONT-1-1-1-1-1;
b. If the ONT is in service, place the ONT in OOS state.
Example:
ED-ONT::ONT-1-1-1-1-1;
2
Power down the unit by disconnecting the power cable; see
connections" (p. 38)
June 2022
Issue 3
40).
for the power input.
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-47753-AAAA-TCZZA
BGW320-505
Figure 4-2, "BGW320-505 ONT
39