Operation; Operation Range; When To Use Which Feature - Daikin FTXTM30R2V1B User Reference Manual

5 Operation

5.1 Operation range

5.2 When to use which feature

FTXTM-R, FTXTM-S
Daikin room air conditioner
4P728152-2 – 2023.03
INFORMATION
The indoor unit is delivered with the wireless remote control as the user interface.
This manual describes only operation with this user interface. If another user
interface is connected, refer to the operation manual of the connected user
interface.
Use the system in the following temperature and humidity ranges for safe and
effective operation.
Outdoor RXTM-A
temperature
RXTM-R
Indoor temperature
Indoor humidity
(a)
A safety device might stop the operation of the system if the unit runs outside its
operation range.
(b)
Condensation and water dripping might occur if the unit runs outside its operation range.
You can use the following table to determine which features to use:
Feature
Basic features
Operation modes and
temperature
+ Airflow direction
(a)(b)
Cooling and drying
-10~46°C DB
-10~46°C DB
18~32°C DB
14~23°C WB
(b)
≤80%
Tasks
To start/stop the system and to set the
temperature:
▪ In Heating and Cooling mode, heat up or cool
down a room.
▪ In Fan only mode, blow air in a room without
heating or cooling.
▪ In Drying mode, decrease the humidity in a
room.
▪ In Automatic mode,
temperature and
automatically selected.
To adjust the airflow direction (swing or fixed
position).
5 Operation
|
(a)
Heating
-30~24°C DB
-31~18°C WB
-25~24°C DB
-26~18°C WB
10~30°C DB
—
an appropriate
operation mode is
User reference guide
19