Cisco C11 1 8P Series Hardware Installation Manual page 64

Install a Micro-SIM Card onto a USB LTE Dongle
Figure 54: Micro-SIM Card Slot with Dust Cover
Step 1
To insert a micro-SIM card into a USB LTE dongle, do these steps:
a. Tap open the micro-SIM protective cap on the USB dongle, gently insert the micro-SIM card with its edge oriented
as shown in the figure until the SIM is seated in the socket.
b. Tap close the micro-SIM protective cap on the USB to close the slot.
Step 2
To remove a micro-SIM card into a USB LTE dongle, do these steps:
a. Tap open the dust cover, and then gently push the micro-SIM card to eject the card from the SIM slot.
b. Tap close the micro-SIM protective cap on the USB to close the slot.
Note The antenna orientation may need to be adjusted for optimal performance.
Perform the following steps to insert the USB LTE dongle with the SIM card into a horizontal slot on the rear
panel of a C110x series router:
1. Ensure the micro-SIM is installed in the LTE USB dongle.
2. Plug the LTE USB dongle into the magnet holder.
3. Attach the magnet holder into the USB port on the metal front panel of C1101-4P.
Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router
58
Install and Upgrade Internal Modules and Field Replaceable Units