Operation - Royal Sovereign ARP-9409 Owner's Manual

opeRatIon

before Use
•∙Check∙to∙make∙sure∙rubber∙drain∙plugs∙are∙securely∙plugged∙into∙the∙drain∙ports∙on∙the∙back∙of∙the∙unit∙to∙prevent∙water∙leaks
•∙Check∙to∙make∙sure∙that∙air∙conditioner∙has∙been∙properly∙vented∙out∙the∙window∙(∙See∙Installation∙pg∙7.)
•∙Check∙to∙make∙sure∙air∙conditioner∙is∙on∙a∙flat∙surface
•∙Conduct∙a∙Power∙Plug∙Check:
1. Press the RESET button on the power cord.
2. Plug cord into an electrical outlet.
3. Press the TEST button on the power cord. The RESET button should pop up.
4. Press the RESET button for use.
5. Do not use the air conditioner if the test fails. The green light on the power cord will turn on if the plug is working properly.
note: If you turn the air conditioner off and immediately restart it, allow 3 minutes for the compressor to restart cooling.
In the event of a power failure, wait 3 minutes before restarting unit.
control panel
buttons
Power button Timer button
Sleep mode button Fan speed button
Mode button Temperature / Timer up button
Temperature / Timer down button
Indicator lights
Low fan speed High fan speed
Automatic mode Cool mode
Dehumidify mode Fan only mode
8
F
C
H