Trigger Lock; Pressure Relief Procedure - Graco GH 675 Repair Manual

Trigger Lock

Trigger Lock
Always engage the trigger lock when sprayer
is stopped to prevent the gun from being
triggered accidentally by hand or if dropped
or bumped.

Pressure Relief Procedure

This equipment stays pressurized until
pressure is manually relieved. To help
prevent serious injury from pressurized
fluid, such as skin injection, splashed fluid
and moving parts, follow the Pressure
Relief Procedure whenever sprayer is
stopped and before sprayer is cleaned or
checked, and before equipment is
serviced.
4
1. Engage trigger lock.
2. If applicable, turn electric motor ON/OFF
switch to OFF position. Wait 7 seconds
for power to dissipate.
3. Unplug power cord or shut engine off.
4. Disengage trigger lock.
3A5443B