GE JS960 Owner's Manual page 14

Special features of your oven control.
14
Cook and Hold
Your new control has a cook and hold feature
that keeps cooked foods warm for up to 3
hours after the cooking function is finished.
To activate this feature, follow the steps
below.
Press the BAKE and BROIL HI/LO
pads at the same time for 3 seconds
until the display shows SF.
Changing the Speed of the Increase or Decrease Pads
As you use the INCREASE or DECREASE pads
when setting a time or temperature, you may
notice the display changes slowly. This special
feature allows you to change the speed.
To set the speed you prefer, follow the
steps below.
Press the BAKE and BROIL HI/LO
pads at the same time for 3 seconds
until the display shows SF.
Press the INCREASE pad. The
display will show you a set speed
between 1 and 5.
Press the COOKING TIME pad.
The display will show Hld OFF.
Press the COOKING TIME pad again
to activate the feature. The display
will show Hld ON.
Press the START pad to activate
the cook and hold feature and
leave the control set in this special
features mode.
Press the INCREASE pad to
increase the speed up to the
number 5.
Press the DECREASE pad to
decrease the speed down to the
number 1.
Press START to activate the setting
and leave the control set in this
special features mode.