Advertisement
Available languages
Available languages
Introduction
Thank you for buying this product. To minimize the risk of injury by means of fire or electric
shock
we urge that our clients take some basic
Please read this instruction manual carefully and make sure that you have understood its con-
tent.
Always use a grounded power connection with the right mains voltage. The corresponding mains volt-
age you can find on the nameplate. If you have doubts about the connection being grounded, have it
checked by a qualified
Install the device in a safe location so that nobody can step on the cable, fall over or damage it. Dis-
connect the power plug before cleaning the float switch and use only a
The interior of the float switch contains no parts that can be inspected or serviced by the user. Leave
the maintenance, adjustment and repair to
ised intervention
safe.
Description
The float switch can respond to water-level changes and
switch is connected to a pump it can control the water level and protect the pump against dry running.
The float switch has an integrated change-over switch that is: over a break contact and a normally
open contact. This way the float switch can control the water-level and protect the pump against dry-
running.
Technical data
Voltage
Intensity of current
Frequency
Max. Temperature
IP
The Fixing of the Weight- Balance Chart 1
Cable connection: Automatic filling: chart 2,3,4
© by WilTec Wildanger Technik GmbH
http://www.shop.wiltec.info
professional
. Never use a faulty
warranty period
the 2-year
AC 125/250 V
AC 10A
50-60 Hz
50°C
IP68
Insert the cable from the wide opening in the weight-balance and pull it through
according to the needed switching height (water level).
safety precautions
electric cable.
qualified technical personnel
no longer valid
is
simultaneously
when using this article.
damp cloth
for cleaning.
unauthor-
. In case of
! Keep this instruction manual
deliver a signal. If the float
Advertisement
