Advertisement
Quick Links
Operation Manual
Pressure Switch for House Water Systems SK-9
50622
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec SK-9
Summary of Contents for WilTec SK-9
- Page 1 Operation Manual Pressure Switch for House Water Systems SK-9 50622 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 If your pump has an output of more than 1.1 kW, you should connect a commercially available power protection device or a corresponding power relay. With a 380 V power protection, 380 V/400 V three- phase pumps can also be controlled. © by WilTec Wildanger Technik GmbH Item 50622 Page 3 http://www.WilTec.de...
- Page 4 3. Screw in the differential pressure nut (2) up to the switch-off pressure. Dimensions and pieces German English Einstelldruck Switch-on pressure Differenzdruck Differential pressure Motor Motor Netz Mains Erde Earth © by WilTec Wildanger Technik GmbH Item 50622 Page 4 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 5 All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.