Advertisement
Quick Links
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ
insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Operation Manual
SKD-1 - Pressure Switch
50610
51264
Illustration similar, may vary depending on model
SKD-1
SKD-1 with cord
Advertisement
Related Manuals for WilTec SKD-1 with cord
Summary of Contents for WilTec SKD-1 with cord
- Page 1 SKD-1 - Pressure Switch 50610 SKD-1 51264 SKD-1 with cord Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
- Page 2 The information contained in this document is subject to change without prior notice. No part of this document can be copied or duplicated in another form without the prior written consent of WilTec Wildanger Technik GmbH. The WilTec Wildanger Technik GmbH assumes no liability for any errors in this user manual or the connection diagram.
- Page 3 Electrical connection The electrical connection is made at a 230 V ~ 50 Hz socket outlet with grounding contact. Fuse protection at least 10 Ampere. © by WilTec Wildanger Technik GmbH Seite 3 http://www.WilTec.de http://www.aoyue.eu January 2020 Version 7...
- Page 4 B: The water flow switch at the pump control input is permanently actuated. This can be caused by contamination, calcification or a foreign body. (An optical check confirms this problem and can be cor- rected by cleaning.) © by WilTec Wildanger Technik GmbH Seite 4 http://www.WilTec.de http://www.aoyue.eu...
- Page 5 2 bar. Before the start of the machine the suction hose and the pump filling must be checked! © by WilTec Wildanger Technik GmbH Seite 5 http://www.WilTec.de http://www.aoyue.eu January 2020 Version 7 http://www.teichtip.de...
- Page 6 The pump does not have sufficient pressure Intermittent pump Board is damaged There is a leak with more work The pump does not have sufficient than 0.6 l/min loss. pressure © by WilTec Wildanger Technik GmbH Seite 6 http://www.WilTec.de http://www.aoyue.eu January 2020 Version 7 http://www.teichtip.de...
-
Page 7: Disposal Regulations
All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.