Stamina 35-1691A Owner's Manual page 9

ASSEMBLY INSTRUCTIONS
STEP 3
Slide the SAFETY PAD(4) over the rail frame. Make sure the holes in SAFETY PAD(4) fit over the threaded
connectors properly. Refer to illustration 3.
HINT : Install one hole over a threaded connector. The next hole installed should be on the connector on
the opposite side of the trampoline.
STEP 4
Remove the Plastic Caps from the threaded connectors. Refer to the position of the legs as shown in
illustration 4. First, screw the two LEGS(5) with Warning Labels into the threaded connectors on the rail
frame. Next, attach the remaining six LEGS(5).
3.
B.
Second step, install the
Safety Pad(4) on the opposite
end being sure the hole fits over
the threaded connector.
STEP 5
Place the trampoline in the normal use position. Make
sure that the SAFETY PAD(4) covers the Elastic Bands
on the Stamina® Oval Fitness Trampoline. Stand on
the trampoline to make all eight legs sit flat on the floor.
WARNING The SAFETY PAD(4) must be securely
!
attached to the frame before using the
trampoline. It must be properly positioned
as shown in illustration 5.
STEP 6
Post the USE INSTRUCTIONS SIGN(16) in a highly visible
and safe location. The USE INSTRUCTIONS SIGN(16)
shall be placed such that it will be readily visible to the
intended viewer.
4.
A.
First step,
install the Safety
Pad(4) on this end
being sure the
hole fits over the
threaded connector.
Warning
Label
Remove all of the
eight Plastic Caps from the
threaded connectors before
installing the LEGS(5).
9
Warning
Label
Threaded
Connector
5.