Table of Contents
Advertisement
Steam Modes
1.
Depending on the fabric you are ironing, you can select between Regular Steam
mode or ECO mode.
2.
Press the steam settings "SET" button to swap between Regular Steam and ECO
mode. The respective indicator will begin to flash.
3.
The iron is ready for operation when the indicator is solid.
o
Standard steam mode: is suitable for a wide range of fabrics, including
cotton, linen, and most synthetic blends. It provides a balanced level of steam
output for effective wrinkle removal without the need for excessive steam.
o
Eco mode: is suitable for synthetic, silk, and wool fabrics. This mode uses 70%
less power compared to standard mode.
Burst Steam Mode
For tougher wrinkles and stubborn folds in fabrics, the burst steam mode can be used.
1.
Wait for the iron to reach operating temperature.
2.
Press the steam trigger twice in rapid succession to release a concentrated burst
of steam that effectively smooths out wrinkles and folds fabrics with ease.
Auto Shut-off:
1.
If the iron remains stationary for more than 10 minutes, it will enter Auto shut-off
mode.
2.
Auto shut-off indicator will flash on the display and the iron will 'BEEP' 6 times.
3.
Pressing the steam switch will reactivate the iron
Anti-drip
This iron has an Anti-drip feature that will automatically stop it from producing steam when
the temperature is too low. This prevents water from dripping out of the soleplate.
Refill Reminder
If the water tank is empty, the pump will attempt to draw water for 45 seconds before
automatically stopping. The refill reminder lamp will illuminate. Unplug the iron and refill it
with clean (distilled) water.
Safety Lock
The safety lock helps secure the iron in a fixed position when it is not in use. When
activated, the safety lock prevents accidental movement or opening of the iron, reducing
the risk of burns or damage. This feature is especially useful during storage or when
transporting the iron.
Advertisement
Table of Contents
