Table of Contents
Advertisement
OPERATION
• Before using the iron for the first time, remove the plastic protector from the base (if
present) and clean the base with a soft cloth to remove any residue or impurities from
the iron's ceramic surface.
• Do not run the iron over metal objects (such as against the ironing board, buttons, zips,
etc.)
• Pure wool fabric (100% wool) can be ironed with this appliance using the steam ironing
function.
• Always check the garment label before ironing an article of clothing for the first time.
• This appliance is a constant temperature model, the ceramic iron surface will be at a
temperature of 140 ± 20°C. You will not need to adjust the temperature manually.
Filling the Water Tank
1.
Disconnect the iron from the electrical outlet.
2.
Open the water tank cap.
3.
Using the included measuring cup, fill the water tank with clean water to the MAX
water level (1.5L) and close the cap. Note: Distilled water is recommended. Do not
use chemical additives, scented substances or decalcifiers.
Turning the Iron ON/OFF
1.
Press the Power button to turn the iron on. The light and display will illuminate and
the iron will begin heating.
2.
The Regular steam mode indicator will begin flashing indicating that the ceramic
iron surface is heating up. The indicator will turn solid when it has reached
operating temperature.
3.
To turn the iron off, press and hold the power button for 5-10 seconds. The light
and display will turn off. Note: The iron will still be hot. Allow it to completely cool
before storing it away.
Ironing
1.
Press the Steam button to release steam.
2.
After ironing, return the iron to its base.
3.
Unplug the iron from the power outlet, empty any remaining water, and allow it to
cool down before storing it away.
Advertisement
Table of Contents
