Installing A Cpu Module; Cpu Module Slots - Compaq AlphaServer 1200 User Manual

7.3 Installing a CPU Module

Remove the top cover and left side panel to access the system board. After you
have installed the new module, verify the installation by issuing the show cpu
command from the SRM console or display the system bus configuration from
the AlphaBIOS console.
Figure 7–4 CPU Module Slots
CPU 0
CPU 1
PK-0903C-97
WARNING: CPU modules and memory modules have parts that operate at high
temperatures. Wait 2 minutes after power is removed before touching any module.
CAUTION: Wear an antistatic wrist strap when working on this system.
Removal
NOTE: Before removing the CPU module, you must remove the memory card
adjacent to it. See Section 7.4 for the memory card removal procedure.
1. Shut down the operating system and power down the system.
2. Remove the top cover and left side panel.
7-8 User's Guide