5.9 Switching from AlphaBIOS to SRM Console
It is necessary to switch to the SRM console to boot DIGITAL UNIX or
OpenVMS or to run firmware-based diagnostics. To switch from AlphaBIOS to
the SRM console, press the Rest button on the control panel, wait 5 seconds, and
press the Halt button.
OpenVMS (SRM) from the Advanced CMOS Setup screen and reset the system.
Figure 5-27 Switching to the SRM Console
PCI Parity Checking:
Power-up Memory Test:
AlphaBIOS Password Option:
Console Selection:
Power-up Memory Test Length:
Press
or
to select the firmware console that will be presented
the next time the system is power-cycled.
ESC=Discard Changes
5-44 User's Guide
Alternatively, select DIGITAL UNIX (SRM) or
Advanced CMOS Setup
Disabled
Enabled
Disabled
Digital UNIX Console (SRM)
Windows NT Console (AlphaBIOS)
Full
OpenVMS Console (SRM)
Digital UNIX Console (SRM)
F10=Save Changes
F1=Help
PK-0750B-96
Need help?
Do you have a question about the AlphaServer 1200 and is the answer not in the manual?