Advertisement
Preset EQ: After turning on EQ switch, click the top left button and choose
preset equalizer.
User Defined EQ: drag the corresponding frequency band up and down to
slightly adjust the EQ curve (on the bands page, switch left and right to change
the option). Successively adjusting the EQ in need, it will immediately take
effect.
Note: PEQ switch could be enabled from Lab Features option. When the
switch is on, the EQ panel will be replaced with a parametric EQ panel so that
you can adjust the frequency bands manually.
Reset EQ: Tap the Reset button at the upper right corner to reset the present
EQ.
Notes: if the system is reset to factory mode, all EQ settings will be reset to
default.
Advertisement
