Advertisement
INTRODUCTION
1.1 S
PECIFICATIONS
Processor
Chipset
PCI bus
System Memory/RAM
IDE Drive Interface
BIOS
I/O Connector
Reserved pin-header
RTC Battery
Operating Temperature
Storage Temperature
Power
Humidity
Dimensions
Model Extension
: Socket 478 for Intel Pentium 4/Celeron Processor,
up to 2.4GHz,400MHZ FSB
: Intel 845GL chipset (pin-to-pin compatible with 845G
series); 82801DB I/O Controller Hub 4 (ICH4)
: A. Two Intel 82540EM 32bit Gb Ethernet Controller
(Colay with 82551QM)
B. Four Intel 82551QM 10/100 Mb Ethernet Controller
C. One 124-pin Mini-PCI slot
D. One Standard PCI Slot
: Two DDR200/266 DIMM Socket, up to 2GB RAM
: A. One 40-pin (2x20, 2.54mm) IDE connector that
support Ultra ATA100, build in secondary master
IDE Channel
B One 44-pin (2x22, 2mm) IDE connector that support
Ultra ATA100, build in secondary slave IDE Channel
C. One CompactFlash type II socket, support ATA
mode, build in primary master IDE Channel
: Award licensed BIOS
: A. Six external RJ-45 connectors
B. One RS-232 DB-9 connector
: A. Keyboard/Mouse pin-header
B LAN LED pin deader l
C. Power/Status LED header
D. 16 pin non-standard PIO x 1 for LCM connection
E. One 1*4 pin-header (for control Keypad use)
F. On board 2 pin header for software reset
: A. Internal RTC with Li battery
B. Watchdog Timer Function
: 0 °C~60 °C
: -20 °C~70 °C
: On-Board 20 pin ATX power connector (AT function
only)
: 5 %~95% RH, non-condensing
: 305 x 243 mm
: MB-X71A: Two 82540+Four 82551
~ 2 ~
Advertisement
