Advertisement
AWARD BIOS SETUP
There are four selections for Power Management, three of which have fixed mode setting.
Disable (Default)
Min. Power Saving
Max. Power Saving
User Defined
Video Off Option : This option is for choosing the setting in which the monitor will turn off.
The default setting is "Suspend".
N/A
Doze
Standby
Suspend
Video Off Method : This determines the manner in which the monitor is blanked. The
default setting is "V/H SYNC+Blank".
V/H SYNC+Blank
Blank Screen
DPMS
Suspend Mode : Option are from "1 Min" to "1 Hour" and "Disable". The CPU clock will be
stopped and the video signal will be suspended, if no Power Management events occur
for a specified length of time. Full power function will return when a Wake-Up event is
detected.
HDD Power Down: Options are from "1 Min". to "15 Min". and "Disable". The IDE hard
drive will spin down if it is not accessed within a specified length of time.
No power management. Disables all four modes.
Minimum power management.
Mode
=1hr.,
Suspend
Down=15min.
Maximum power management. –Only available for SL CPU's.
Doze
Mode=1min.,
Mode=1min., and HDD Power Down=1min.
Allows you to set each mode individually. When not disabled,
each of the ranges are from 1 min. to 1 hr. except for HDD
Power Down which ranges from 1 min. to 15 min. and disabled.
Always turn on.
During Doze mode, the monitor will be turned off.
During Standby mode, the monitor will be turned off.
During Suspend mode, the monitor will be turned off.
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blank to the video
buffer.
This option only writes blanks to the video buffer.
Initial display power management signaling.
~38~
Doze Mode=1hr. Standby
Mode=1hr.,
and
Standby
Mode=1min.,
HDD
Power
Suspend
Advertisement
