Advertisement
AWARD BIOS SETUP
USB Controller: Select Enabled if your system contains a Universal Serial Bus (USB)
controller and you have USB peripherals
USB Keyboard Support : Select Enabled if your system contains a Universal Serial Bus
(USB) controller and you have a USB keyboard.
Init Display First : This item allows you to decide to active whether PCI Slot of VGA card
or AGP first. The settings are "PCI Slot" and "AGP Slot".
Onboard FDD Controller : Select Enabled if your system has a floppy disk controller
(FDC) installed on the system board and you want to use it. If you install add-in FDC or
the system has no floppy drive, select Disabled in this field. The settings are "Enabled"
and "Disabled".
Onboard Serial Port 1 : Select an address and corresponding interrupt for the first and
second serial ports. The settings are "3F8/IRQ4", "2E8/IRQ3", "3E8/IRQ4", "2F8/IRQ3",
"Disabled", "Auto".
~36~
Advertisement
