Advertisement
3.8 P
P/PCI C
N
Both the ISA and PCI buses on the CPU card use system IRQs & DMAs. You must set
up the IRQ and DMA assignments correctly through the PnP/PCI Configuration Setup
utility, otherwise the motherboard will not work properly.
PnP/PCI Configuration Setup Screen
CMOS Setup Utility – Copyright © 1984-2001 Award Software
PnP OS Installed
Reset Configuration Data
Resources Controlled By
► IRQ Resources
► DMA Resources
► Memory Resources
PCI/VGA Palette Snoop
PCI Latency Timer (CLk)
INT Pin 1 Assignment
INT Pin 2 Assignment
INT Pin 3 Assignment
INT Pin 4 Assignment
INT Pin 5 Assignment
INT Pin 6 Assignment
INT Pin 7 Assignment
INT Pin 8 Assignment
$ % & Move
Enter: Select
F5: Previous Values F6: Fail-Safe Defaults
PnP OS Installed : When set to "Yes", BIOS will only initialize the PnP cards used for
booting (VGA, IDE, SCSI). The rest of the cards will be initialized by the PnP operating
system like Windows® 95 or 98. When set to "No", BIOS will initialize all the PnP cards.
So, for non-PnP operating system (DOS, Netware®), this option must set to "Yes".
ONFIGURATION
PnP/PCI Configurations
No
Disabled
Manual
Press Enter
Press Enter
Press Enter
Disabled
32
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
+/-/PU/PD: Value
F10: Save Esc: Exit
F7: Optimized Defaults
~ 39 ~
AWARD BIOS SETUP
Item Help
Menu Level ►
Select Yes if you
are using a Plug
and Play capable
operating system.
Select No if you
need the BIOS to
configure non-boot
devices.
F1: General Help
Advertisement
