To Connect The Electrical Wiring To The Indoor Unit - Daikin Altherma ELSH12P30E Series Installation Manual

6 Electrical installation
In case of...
Wired room thermostat ▪ Installation manual of the wired room
with multi-zoning base unit thermostat (digital or analogue) +
multi-zoning base unit
▪ Addendum
equipment
▪ In this case:
▪ You need to connect the wired
▪ You need to connect the multi-
▪ For cooling/heating operation, you
6.3.1 To connect the electrical wiring to the
indoor unit
Remark: All cables which will be connected to the switch box of the
ECH O must be fixed by strain relief.
2
To have easier access to the switch box itself and the routing of
cables the switch box can be lowered (see
unit" [ 4 13]).
If the switch box is lowered in service position while the electrical
installation is done, additional cable length has to be taken into
account adequately. The cable routing in normal position is longer
than in service position.
Installation manual
22
See...
book for optional
room thermostat (digital
analogue) to the multi-zoning base
unit
zoning base unit to the outdoor unit
also need to implement a relay
(field supply, see addendum book
for optional equipment)
"4.2.1 To open the indoor
or
All cables which will be connected to the switch box of the ECH
must be fixed by strain relief.
O
2
ELSH/X(B)12P30+50E
Daikin Altherma 3 R MT ECH₂O
4P708484-1 – 2023.03