Fig. 3.16: CAN header
Note: CAN feature is only available on PX30-uQ7 module with an STM32, see (Section 11.4.4 Companion Controller 1).
3.18 CTRL I/O Connector
The board provides signals for watchdog trigger in- and output, SoM PMIC power-on input, reset and external display power
enable.
Fig. 3.17: CTRL I/O header
3.19 MISC Connector
The board provides signals for thermal overheat of external hardware and the processor, utility signals for SD and GPIO0.
PX30-uQ7 User Manual
v1.2.0-1-g5ccabb6
© Theobroma Systems Design und Consulting GmbH
Page 17