O (Rinse Plus); Hygiene Care); P (Easy Iron); Z (Water Plus) - Bosch WDU28 Series Instruction Manual

Table of Contents

Advertisement

Additional programme settings
en

O (Rinse plus)

Settings that can be selected:
+1
+ 1 rinse cycle
+2
+ 2 rinse cycles
+3
+ 3 rinse cycles
Additional rinse cycles for particularly
sensitive skin and/or for areas with very
soft water.
Longer programme duration.
The number of rinse cycles that the
appliance actually runs depends on the
number that is set as a basic setting for
the programme in question.

2 (Hygiene care)

An innovative function, pretreat dry
laundry by hot air (up to 65°C) for
enhanced hygiene need, followed by a
low temperature washing cycle.
Achieves both hygiene effect and fabric
care. Suitable for most non-delicate
textiles.
During this process, the drum
Note:
light will animation for approx. 10
minutes.

p (Easy iron)

Reduces creasing by means of a
special spin sequence followed by
fluffing and reduced spin speed.
Touch p (Easy iron) and activate or
deactivate it.
If p (Easy iron) has been
Note:
activated, the laundry will have retained
a higher than average level of moisture
after spinning.
34

Z (Water plus)

Increased water level for gentler
treatment of the laundry.
Touch Z (Water plus) to activate or
deactivate it.
â (Memory)
You can save a selected programme
with your favourite settings here.
To store:
Switch on the appliance.
1.
Select a programme.
2.
If required, change the programme
3.
default settings and/or select
programme additional settings.
Touch and hold â (Memory) button
4.
for approx. three seconds.
The programme is saved if all of the
settings flash briefly.
Calling up: touch â (Memory) button
briefly after you switch on the appliance.
Reset: touch and hold â (Memory)
button again for approx. three seconds
after selecting the new programme and
settings.
Á (Silent)
Special designed function for noise
reduction. Washing and drying process
noise will be reduced, and ending
signal will be switched off.
If silent is selected for wash only,
Note:
remaining moisture of the laundry will
be slightly increased. The spin result
may not be satisfying. Before hanging
you can select 0 programme to further
reduce moisture.

Advertisement

Table of Contents
loading

Table of Contents