Table of Contents
Advertisement
Help Guide
In-Car Receiver
XAV-9000ES
Using Apple CarPlay Wirelessly
When using Apple CarPlay for the first time, device registration (called "pairing") is required. Pairing enables this unit and
your iPhone to recognize each other.
Note
Make sure the GPS antenna (aerial) (supplied) is connected.
Place your iPhone within 1 m (3 ft) of this unit.
1
Press HOME, then touch [Settings].
2
If [Settings] is not set in the Favorite area, touch [All Apps] to display the HOME2 screen, then select [Settings].
Hint
You can touch [Devices] to open the [Device Connection] screen alternatively.
Touch [Device Connection].
3
Touch [+Add New Device].
4
Operate your iPhone according to its message on the [Add New Device] screen.
5
When setting the BLUETOOTH setting, Wi-Fi setting, and Apple CarPlay of your iPhone to [ON], select "XAV-
9000ES" on the setting screen of your iPhone and then proceed to the pairing steps.
[Pairing Request] appears on the unit.
6
Confirm the [Passkey:].
The same 6-digit passkey appears on your iPhone and the unit.
Touch [Pair], then touch [Apple CarPlay].
7
Note
When pairing the unit with your iPhone via BLUETOOTH, the unit will not prompt you to enter a 6-digit passkey.
If you are prompted to enter a passkey on your iPhone during pairing, it may be a passkey fraud by a malicious third party who
intercepts the communication between your iPhone and the unit.
We recommend that you pay close attention around the vicinity of your car and make sure that there are no untrustworthy third
parties around you before starting pairing again.
14
Advertisement
Table of Contents
