Table of Contents
Advertisement
Turning on the power
1
Turn on the power of the peripherals.
2
Turn on the POWER of VE-7000. Make sure that the POWER/
MIDI indicator lights.
Basic operation
(connected to the VM Console)
Screens in which the VE-7000 can be operated
Operations on the VE-7000 will be valid when the display of the VM
Console is in the following states.
When either [INPUT CH1-24], [MULTI IN CH1-24], or [FLEX BUS MASTER 1-12]
is selected and the channel edit screen is displayed.
fig.chedit2
What is the channel edit screen?
This is a screen where the parameters of the desired channel are edited.
Access it by pressing [CH EDIT] on the VM Console. The title area in the
upper left of the display will indicate "CH EDIT."
This unit is equipped with
a protection circuit. A brief
interval (a few seconds)
after power up is required
before the unit will operate
normally.
Joystick operations will be
valid only when the
channel edit
"SURROUND" page is
accessed.
15
Advertisement
Table of Contents
