Using The Joystick To Control Surround (Connected To The Vm Console); Preparations For Surround Panning - Roland VE-7000 Owner's Manual

Using the joystick to control surround
(connected to the VM Console)
You can use the joystick (located in the SURROUND area) to perform
surround panning.

Preparations for surround panning

Perform the following steps on the VM Console to enable the Surround
function.
1
Hold down [SHIFT] and press [SYSTEM (PROJECT)] to access
the system menu.
2
Press cursor [UP] and then [F2] to select "SURROUND."
3
Use cursor [UP] to select the top parameter, and press
[F1(ON)] to turn "SURROUND CONTROL MASTER SW" ON
(highlighted in black).
4
Press [F2 (ON)] to turn "MIDI JOYSTICK CONTROL" ON
(highlighted in black).
fig.surmode
21