Advertisement
Before you begin
Input/output device settings for your application
In the application(s) that you intend to use, specify the MIDI
device they are to use. (For details on this setting, refer to the
owner's manual for your application.)
* If you are unable to select the UM-1EX device, a problem
may have occurred. Refer to "Troubleshooting" (Owner's
Manual).
MIDI input/output device
* In the Windows Media Player, the MIDI input/output
device of UM-1EX cannot be used.
Please select the following device in your MIDI compatible
application.
[MIDI OUT devices]
EDIROL UM-1 MIDI
[MIDI IN devices]
EDIROL UM-1 MIDI
To change the settings
To change or verify settings
1.
When changing driver settings, always make sure to first
quit all applications using the UM-1EX. This is unnecessary
when only checking the settings.
2.
Open "Control Panel," click "Additional Options," and then
click "EDIROL UM-1."
* If you're using the Classic View, double-click "EDIROL UM-
1."
3.
The "EDIROL UM-1 Driver Settings" dialog box will appear.
4.
To modify the settings, make the changes and click [OK]. To
simply check the settings, be sure to click [Cancel] after
viewing the settings.
* For details on the setting items, refer to "About the items in
the Settings dialog box."
About the items in the Settings dialog box
The "Light Load" check box
Normally, you should leave this check box cleared.
* The modified setting will take effect after the USB cable of
the UM-1EX is disconnected and reconnected.
Information
This field shows the driver version.
Advertisement
