Huawei Mate X3 User Manual page 123

3
In Control Panel, touch
Projection. Your device will then start searching for available external large-screen
devices.
You can also go to Settings > More connections > Easy Projection to enable
Wireless Projection.
4
Touch the device that you wish to project your device to from the detected devices.
5
Once your device is projected, touch
the device or Vision.
By default, after the connection is successful, banner notifications for incoming calls,
messages, and alarms, and Multi-Window are only displayed on your phone instead of the
large-screen device. To change the settings, touch
notifications.
The Hide notifications feature is only supported on certain products.
To exit wireless projection, go to
swipe down from the upper left edge of the screen to display the notification panel, and
touch DISCONNECT (depending on your device model).
Use Desktop Mode to Make Work More Convenient
After your device screen is projected, go to
In Desktop mode, your device and the large-screen device work independently and can show
different content. The content of a device projected on the large-screen device is in a layout
similar to that of the computer desktop.
For example, you can edit a document on the large-screen device while chatting on your
device. You don't need to worry about missing out on notifications, calls, or messages, as a
red dot will appear on the notification panel on the large-screen device to let you know.
Use Your Device as a Touchpad
After your device screen is projected to a large-screen device in Desktop mode, if no
keyboard or mouse is available, your device can work as a touchpad to complete input
operations of a mouse and keyboard.
Go to > Touchpad, and you're free to:
Use gestures as instructed to simulate mouse commands.
•
to expand the shortcut switch panel, and touch Wireless
, and select your preferred audio device, either
> Project screen on the phone screen; you can also
> Desktop mode.
, and turn off the switch for Hide
Settings
120