Table of Contents
Advertisement
Noise Suppressor
The noise suppressor leaves the original sound unmodified, but mutes only the noise during the silent intervals.
NS SW (switch)
Off, On
Turns the noise suppressor effect on/off.
NS Thrsh (threshold level)
0 – +8 – +127
Adjusts the level at which the noise suppressor will begin to take effect. When the signal drops below the
specified level, it will be muted.
Stereo Flanger
The flanging effect gives a twisting, jet-airplane-like character to the sound.
FL SW (switch)
Off, On
Turns the stereo flanger effect on/off.
FL Manu (manual)
0 – +64 – +127
Adjusts the center frequency at which the flanging effect will be applied.
FL Rate (rate)
0.05 – 0.20 – 10.00 Hz
Adjusts the rate at which flanger is modulated.
FL Depth (depth)
0 – +32 – +127
Adjusts the depth of modulation for the flanger.
FL Phase (phase)
0 – 180 deg
Adjusts the spatial spread of the sound.
FL Reso (resonance)
0 – +64 – +127
Determines the amount of resonance (feedback). Increasing the value will emphasize the effect, creating a more
unusual sound.
FL Bal (balance)
D100:0W – D75:25W – D0:100W
Adjust the balance between the effect sound volume and the direct sound volume.
FL Lev (level)
0 – +127
Adjusts the volume.
Audio Multi-Effects
17
Advertisement
Table of Contents
