Introduction to Effects and Parameters
About the Effect Connection Sequence
The optimal sequence for connecting effects is determined automatically based on the effect
settings.
SYNTH1 /
SYNTH2
(COMP / DRIVE)
T.WAH UP /
T.WAH DOWN /
T.WAH EDGE
(SFX)
BASS ENHANCE
This effect makes the bass frequencies more prominent in response to changes in the input
level.
To adjust the amount of effect that's applied when the effect is on, hold down
[BASS ENHANCE] and press [
16
BASS ENHANCE
DEFRETTER
(SFX)
WAH
EQ
COMPRESSOR
(COMP / DRIVE)
NOISE
SUPPRESSOR
] or [
].
OVERDRIVE /
OCTAVE
DISTORTION
(SFX)
(COMP / DRIVE)
0—99ms DELAY /
100—700ms DELAY /
PHASER /
FLANGER /
FOOT VOLUME
CHORUS /
CHO+DELAY /
REVERB
(DELAY / MOD)