Chevrolet Monte 2003 Owner's Manual page 321

Removing the Wheel Covers and the
Wheel Nut Caps
Removing the Wheel Cover Caps
Your vehicle may have
center caps if equipped
with aluminum wheels. To
remove a center cap
use the wrench to pry
gently at the notch. Don't
use a tool that is
narrower than the wrench
to pry at this notch.
Removing the Wheel Covers
If your vehicle is equipped
with wheel covers, loosen
the plastic nut caps
with the wheel wrench. If
needed, you can finish
loosening them with your
fingers. Then, using the flat
end of the wheel wrench,
pry along the edge of
the cover until it comes off.
5-73