Verifying Your Printer
After setting up the printer, a printer icon
will appear in Windows' "Printers and
Faxes". Right click the printer icon and
choose Properties to configure the printer.
When properly setup, the SpaceLink Home
Gateway will show the printer name in the
"Homegateway Discovery" utility and show
"on-line" under the "Printer Server" on the
"Status" page of the web manager.
Chapter 3 - Home Gateway Utilities
If your printer was previously setup, the
SpaceLink Home Gateway printer setup
wizard will change your printing port from
your local LPT1 (parallel) port to "Remote
Port". If necessary, you can change this
back at anytime or use Windows "Add
Printer" to setup another printer on
whatever port you require.
SpaceLink Home Gateway
59