Table of Contents
Advertisement
3.6.6
CPU Storage Configuration
The items in this menu allow you to configure CPU storage configurations.
•
•
3.6.7
Onboard Devices Configuration
The items in this menu allow you to switch between PCIe Lanes and configure onboard
devices.
HD Audio Controller
This item allows you to use the Azalia High Definition Audio Controller.
Configuration options: [Disabled] [Enabled]
USB Type C Power Switch
[Auto]
[Enabled]
RGB LED lighting
When system is in working state
This item allows you to turn the RGB LED lighting on or off when the system is in the
working state.
Configuration options: [All On] [Stealth Mode]
Q-Code LED Function
[Disabled]
[POST Code Only] Show POST (Power-On Self-Test) code on Q-Code LED.
[Auto]
Intel LAN / LAN2 Controller
This item allows you to enable or disable the Intel LAN / LAN2 controllers.
Configuration options: [Enabled] [Disabled]
3.6.8
APM Configuration
The items in this menu allow you to set system wake and sleep settings.
ErP Ready
This item allows you to switch off some power at S4+S5 or S5 to get the system ready for
ErP requirement. When set to [Enabled], all other PME options are switched off.
Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)]
3-18
This menu will appear only when an Intel
above) is installed.
Due to CPU behavior, CPU RAID functions with Intel
Core™ X-series Processors (6-core or above) and Intel
The system will automatically detect your USB Type-C
provide suitable power if needed.
The USB Type-C
port will always provide power to your devices.
®
Turn off Q-Code LED.
Automatically display POST (Power-On Self-Test) code and
CPU temperature on Q-Code LED.
Core™ X-series Processors (6-core or
®
CPU RSTe only supports Intel
®
SSD modules.
®
devices and
®
Chapter 3: BIOS Setup
®
Advertisement
Table of Contents
