Asus Pro WS X299 SAGE II Manual page 38

14. Addressable RGB LED connector
This connector is for individually addressable RGB WS2812B LED strips or WS2812B
based LED strips.
The addressable RGB LED connector supports WS2812B addressable RGB LED strips
(5V/Data/Ground), with a maximum power rating of 3A (5V) and a maximum of 60 LEDs.
Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so may
cause severe damage to the motherboard, peripherals, or components.
•
•
•
•
1-24
Actual lighting and color will vary with LED strip.
If your LED strip does not light up, check if the addressable RGB LED strip is
connected in the correct orientation, and the 5V connector is aligned with the 5V
header on the motherboard.
The addressable RGB LED strip will only light up under the operating system.
The addressable RGB LED strip is purchased separately.
Chapter 1: Product Introduction