Table of Contents
Advertisement
menu. You can scroll through the list of messages by using the
key. Once a message is read, press
selected message: Reply, Delete, Read next, Lock, Forward
msg., and Call.
If there is an embedded phone number that is highlighted, you will
have the option of calling the number or saving the number. If there
is an embedded e-mail address that is highlighted, you will have the
option of sending the e-mail or saving the e-mail address. If there is
an embedded URL that is highlighted, you will have the option of
saving the URL. Temporarily unavailable options are grayed out.
Note!
Lock/Unlock toggles Message auto deletion off and on. Unsent
and unread messages are automatically locked.
Send new
The Send new submenu is used to enter and send a new text
message or an email. To enter letters and symbols in your message,
see "Entering Letters and Symbols" on page 17.
Note!
This option is dependent on your service provider.
Note!
If your message approaches the maximum message length, you
will see a character countdown indicator in the upper left corner
of the screen.
When you forward a message, you will also forward the original
body of the message. However, when you reply to a message, you
can choose to include the original, use a canned message, or start
with a blank message.
Note!
The maximum message length varies according to service provider.
or
to see the options for the
YES
Sending text messages to other mobile phones
1 Select Send new by pressing
2 You will prompted to enter the 10-digit phone number of the
person you are sending the message to. You can enter a number or
you can press
to choose a phonebook entry or choose a group.
3 When you are finished entering your message text, press
send the message or
to save the message as Unsent mail.
NO
Sending text messages to email addresses
1 Do one of the following:
Change the default message type to Email.
or
Select ON for Set on Send in the Message Type submenu.
2 Select Send new by pressing
3 If the Set on Send option is enabled, you will be prompted to
select Text or Email as the message type before each message is
created. Select email.
4 You will be prompted to enter the email address of the person you
are sending the message to. You can enter an address or you can
press
to choose a phonebook entry.
Note!
The @ symbol is entered by pressing the # key twice. The "."
Symbol is entered by pressing the 1 key once.
5 When you are finished entering your message text, press
send the message or
to save the message as Unsent mail.
NO
Note!
You can set delivery parameters, including Msg. receipt and
Priority, before a message is sent. To change these settings see
"Msg. read ack." on page 27 and "Msg. priority" on page 27. The
default setting for Msg. receipt is Off and the default setting for
Priority is Normal.
Using Your Phone
.
YES
to
YES
.
YES
to
YES
25
Advertisement
Table of Contents
