Adjust Staple Clinch; Control The Clinch - Signode Josef Kihlberg c.561M22 Operating Instructions Manual

Fig. 5
1
2
3
Fig. 6
05.20
It is possible to adjust how tightly the staples are clos-
ing.
– With a 3 mm Allen key turn the adjusting screw
(Fig. 5/1). Turn clockwise for a stronger
clinch. Turn the adjusting screw anti clock wise
to open up the clinch
1
1 Good clinch.
2 Leg length of the staple too long or over bended.
3 Leg length of staple too short or not enough
bended.
If necessary adjust staple clinch, see chapter 5.3.
Josef Kihlberg c.561M22

5.3 ADJUST STAPLE CLINCH

Be sure that the tool is not pointing at
yourself or anyone else when connec-
ting it to the compressed air line.
more.

5.4 CONTROL THE CLINCH

Always use Josef Kihlberg original
staples: JK561-22.
7