Replace The Driver Blade/Anvils - Signode Josef Kihlberg c.561M22 Operating Instructions Manual

Josef Kihlberg c.561M22

6.3 REPLACE THE DRIVER BLADE/ANVILS

– Remove six screws (Fig. 10/1) holding the rear
body to the front section.
– Remove the rear body (10/2) with magazine.
– Replace the driver blade (10/3).
– Assemble parts in reverse order.
If changing the anvils always change both at the same
time:
– Remove the driver blade (10/3).
– Remove the screw (10/4).
– Replace the anvils (10/5).
– Assemble parts in reverse order.
10
Fig. 10
2
1
4
5
3
05.20