Roland MC-808 Sound List page 42

Effects editing parameters
45: SHUFFLE DELAY
Adds a shuffle to the delay sound, giving the sound a bouncy delay
effect with a swing feel.
fig.MFX45
L in
Feedback
Delay A
Delay
Delay B
R in
Parameter Value
Delay #1 0–4000 ms,
note
Shuffle 0–100 %
Rate
Pan A/B L64–63R
Level A100:0B–
Balance A0:100B
Feedback -98– +98 %
#2
Accelera- 0–15
tion
HF Damp 200–8000
Hz, BY-
PASS
Low Gain -15– +15 dB
High Gain -15– +15 dB
Balance # D100:0W–
D0:100W
Level 0–127
42
2-Band
EQ
A
B
2-Band
EQ
Description
Adjusts the time until the delay
sound is heard.
Adjusts the ratio (as a percentage)
of the time that elapses before Delay
B sounds relative to the time that
elapses before the Delay A sounds.
When set to 100%, the delay
times are the same.
Stereo location of Delay A/B
Volume balance between Delay A
and Delay B
Adjusts the amount of the delay
that's fed back into the effect. Nega-
tive (-) settings invert the phase.
Adjusts the time over which the De-
lay Time changes from the current
setting to its specified new setting.
Adjusts the frequency above which
sound fed back to the effect is fil-
tered out. If you don't want to filter
out any high frequencies, set this
parameter to BYPASS.
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the effect sound (W)
Output level
46: TIME CONTROL DELAY
This lets you smoothly vary the delay time. As the delay time is
varied, the pitch will change correspondingly; lengthening the delay
time will lower the pitch, and shortening it will raise the pitch.
fig.MFX46
L out
L in
R out
R in
Parameter
Delay #1
Feedback
#2
Accelera-
tion
HF Damp
Pan
Low Gain
High Gain
Balance
Level
Balance D
Balance W
Time Control Delay
Balance W
Feedback
Balance D
Value Description
0–4000 ms, Adjusts the time until the delay is
note heard.
-98– +98 % Adjusts the amount of the delay
that's fed back into the effect. Nega-
tive (-) settings invert the phase.
0–15 Adjusts the time over which the De-
lay Time changes from the current
setting to a specified new setting.
The rate of change for the Delay
Time directly affects the rate of
pitch change.
200–8000 Adjusts the frequency above which
Hz, BY- sound fed back to the effect is fil-
PASS tered out. If you do not want to filter
out any high frequencies, set this
parameter to BYPASS.
L64–63R Stereo location of the delay
-15– +15 dB Gain of the low frequency range
-15– +15 dB Gain of the high frequency range
D100:0W– Volume balance between the direct
D0:100W sound (D) and the delay sound (W)
0–127 Output level
2-Band
L out
EQ
2-Band
R out
EQ