Get Started - Silk'n Silkn 7 User Manual

Cool the affected area and apply anti-burn cream. Wait until the area has healed completely
before another treatment, and use a lower energy level.
G
If the skin does not return to normal within 3 days, consult your physician.
EN
Infection or bruising
Infection of the skin is exceedingly rare but is still a possible risk following a skin burn or wound
caused by the device.
Very rarely, the device may cause blue-purple bruising that can last 5 to 10 days. As the bruising
fades, there may be a rust-brown discolouration of the skin (hyperpigmentation).
C
Stop use immediately if any of these side effects are more severe.
C
See your physician if the side effects do not go away within 2 to 3 days.

6. Get started!

6.1 Assemble the replaceable cartridge
1. For each body area, it is important to choose the correct replaceable cartridge.
2. To place the cartridge (#13), snap it onto the treatment surface window (#10). To remove
the cartridge, pull it off the treatment surface window.
Cartridge Size
Small
Medium
Large
6.2 Connecting the device
1. Remove the device and other components from box.
2. Plug the adapter into the adapter socket (#9) and plug the adapter into the electricity
supply. All indicator lights (#2, #4, #5, #6) will turn on, and then go off.
6.3 Pre-treatment preparation
C
Remove all jewellery on or near the treatment area before use.
1. Before treating an area, the skin should be shaved, clean, dry and free of any powders,
antiperspirants or deodorants. Do not wax, pluck or tweeze the hair out.
C
Never use flammable liquids such as alcohol (including perfumes, sanitizers, or other
applications containing alcohol), or acetone to clean the skin before use.
C
Do not use the device if the treatment surface (#10) is broken or missing.
Treatment Area
Face, upper lip and sideburns, bikini line and underarms
Bikini line, underarms
The body below the neckline
12