Switching Modes; Determining The Current Mode - Roland FC-200 Owner's Manual

SWITCHING MODES

You can change the mode using either the MODE button or a foot pedal plugged into the MODE jack (BOSS FS-5U,
Optional).
Each of these methods — pressing the button or stepping on the foot pedal — makes the mode change in a different way.
When the MODE Button is Pressed
When the Foot Pedal is Depressed
* You can change the way the mode is switched when using the foot pedal. See "MODE Jack Loop

Determining the Current Mode

Program Change Mode
The Bank value appears on the display, and the Point indicators do not light up.
Control Change Mode
"
lights up.
Note Mode
The note range appears on the display, and the Point indicator at the top right of
the display lights up.
Exclusive Mode
"
10
Program Change Mode
Control Change Mode
Note Mode
Exclusive Mode
Program Change Mode
Control Change Mode
Setting" (p. 28) for the details on how to do this.
" appears on the display, and the Point indicator at the top left of the display
" appears on the display, and the display's two Point indicators light up.