List Of Spare Parts - Beko DRYPOINT RA VSD Series Instructions For Installation And Operation Manual

Technical description
Advanced parameters (service)
ID
RbP
NO = resetting allowed locally and remotely [3].
With RbP = YES - Maximum number of local resets allowed
NoA
With RbP = YES - Time frame within which the maximum number of
TtPR
local resets defined in NoA can be performed.
PSPR YES = Warning reset only allowed with the Service PIN [5].
[1] – Do not set DCC = NO with ambient temperature below 15°C. Alarms A11 and A13 could trigger with the risk of
damaging the dryer. In this case, reset the setting DCC = YES.
[2] - With DPS = 3, the dew point varies according to the ambient temperature.
[3] - With RbP = NO, the maximum number of remote resets allowed, within 60 minutes, is three.
[4] - With TtPR = 0, when NoA Alarms are reached, the dryer asks for the Service PIN to be entered to reset the Alarm.
[5] - With PSPR = YES, the SrV parameter can only be modified with the Service PIN.

11.16.11 List of spare parts

1- With the stopped or operating dryer press
menu.
2- Press to display the list of the dryer's spare parts.
3- Scroll through the list of spare parts using the cursor keys
Downloading the list of spare parts:
4- Install a USB storage drive as described in "Installing and removing the USB
storage drive" and press
drive as described in the section "Installing and removing the USB storage drive."
5- Press to return to the previous screens.
40
Description
Warning/Alarm clearing
YES = resetting only allowed locally
within the time frame defined in TtPR
"Scheduled service" W6 Warning clearing
NO = Warning reset without PIN
to download the spare parts list. Remove the USB
to access the dryer's
Limits Scale
YES / NO -
1...10 1
0...24
hours 1 hour
[4]
YES / NO -
2-
4-
5-
DRYPOINT® RA VSD 800-2500
Factory
setting
NO
1
1 hour
NO
1-
3-