Turning The Power On; Turning The Power Off - Boss AD-3 Owner's Manual

Turning the Power On

Once the connections have been completed (p. 9),
turn on power to your various devices in the order
specified. By turning on devices in the wrong
order, you risk causing malfunction and/or dam-
age to speakers and other devices.
Output Equipment
AD-3 →
(Guitar Amp or Other Device)
1. Switch on the power for the AD-3.
fig.3b
The power indicator lights up and the power
comes on.
2. Turn on the output equipment.
This unit is equipped with a protection cir-
NOTE
cuit. A brief interval (a few seconds) after
power-up is required before the unit will
operate normally. The peak indicator blinks
for a few seconds, then you can use the AD-3
for playing.
When running off batteries, the AD-3 won't
NOTE
switch on unless there's something plugged
into the INPUT jack. This helps prevent run-
ning down the batteries. Be careful, because if
you unplug the equipment plugged into the
INPUT jack, the power switches off.
10

Turning the Power Off

Power down in the reverse order: first the output
equipment, then the AD-3.
Output Equipment
(Guitar Amp or Other Device)
1. Turn off the output equipment.
2. Switch off the power for the AD-3.
fig.3c
→ AD-3