Connections
Attaching the Rubber Feet
(Included)
Connection Example
INPUT
(FROM RIGHT)
Sound Module, CD Player, MD Player, etc.
OUTPUT
(TO LEFT)
Precautions When Connecting
and Turning on the Power
921
• To prevent malfunction and/or damage to speakers or
other devices, always turn down the volume, and turn off
the power on all devices before making any connections.
926a
• When connection cables with resistors are used, the
volume level of equipment connected to the inputs (Input
Jucks) may be low. If this happens, use connection cables
that do not contain resistors, such as those from the
Roland PCS series.
941
• Once the connections have been completed, turn on
power to your various devices in the order specified. By
turning on devices in the wrong order, you risk causing
malfunction and/or damage to speakers and other
devices. (When turning the power off, reverse this
procedure.)
< Connected devices → DM-20 (R) → DM-20 (L) >
942
• This unit is equipped with a protection circuit. A brief
interval (a few seconds) after power up is required before
the unit will operate normally.
Rear Panel
Select
7