Hella PM03 Installation Instructions And Instructions For Use

Hella PM03 Installation Instructions And Instructions For Use

Concealed awning side seam guided

Advertisement

Quick Links

Installation instructions and Instructions for use
These instructions must be read
prior to installation
Concealed awning PM03 side seam guided
Operating guidelines
Installation instructions and Instructions for use
Preliminary remarks HELLA
Concealed awning PM03 side seam guided
With this HELLA product you have opted for a high-quality product with a most up-to-date
technology that can nevertheless be easily installed and operated. In these instructions we
describe the basic installation, commissioning and use.
For authorized specialist staff
For the consumer (user)
The following symbols will assist you with the installation or use and require a safety-
conscious conduct:
Attention!
This symbol indicates instructions that, if disregarded, can put the user in
danger.
Attention!
This symbol indicates instructions that, if disregarded, can potentially
result in damage to the product.
This symbol indicates instructions for use or helpful information.
This symbol requires you to act.
Attention!
This symbol indicates a risk of injury or danger to life due to an electric
shock.
This symbol indicates parts of the product, for which you will find
important information in these installation instructions.
Subject to technical modifications - Date of Issue March/2022
and use!
Installation instructions and Instructions for use

Table of Contents

Preliminary remarks HELLA Concealed awning PM03 side seam guided............................3
General notes.......................................................................................................................4
CE marking...........................................................................................................................5
Safety instructions ................................................................................................................6
Storing ..................................................................................................................................8
Protection of the product during construction phase ............................................................8
Designated use ....................................................................................................................9
Servicing, maintenance and repair .....................................................................................10
Before installation ...............................................................................................................14
Part designation PM03 .......................................................................................................17
Part designation PM03 - Cable guiding ..............................................................................19
Drive duct ...........................................................................................................................20
Manufacturing of the duct for motor drive ...........................................................................21
Fixing box ...........................................................................................................................22
Fastening of the box - installation to the facade .................................................................24
Installation of the cover with front rail .................................................................................25
Installation of the cable guiding ..........................................................................................27
Installation with plaster base and rear insulation ................................................................29
Activation guidelines for electric drives...............................................................................30
Connection directives for motor drive .................................................................................31
Commissioning/functional check ........................................................................................35
Removal .............................................................................................................................36
Handing over report (for the fitter) ......................................................................................37
Handing over report (for the user) ......................................................................................38
Installation instructions and Instructions for use
General notes
Questions
In case of questions concerning the installation or the use of your product, please
consult your authorized specialist shop.
Spare parts/repairs
Spare parts are available at your HELLA specialist shop. Only spare parts that are
approved by HELLA are allowed to be used.
Liability
In case of non-observance of the directions and information given in these instructions
and in case of improper operation or unintended use, the manufacturer shall not accept
any warranty claims concerning any damage to the product. In these cases, the liability
for consequential damage to any parts or persons is ruled out as well.
As the composition or the chemical and physical properties of the plasters used are
beyond our control, the resistance of our systems to corrosion cannot be guaranteed,
Legal notes
The graphs and texts of these instructions were carefully prepared. We cannot be held
liable for any errors and their potential consequences! Subject to technical modifications
to the product and to these instructions! These instructions include copyrighted
information. All rights reserved! The listed product or brand names are trademarks of the
respective owners.
3
4
Subject to technical modifications - Date of Issue March/2022

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PM03 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Hella PM03

  • Page 1: Table Of Contents

    Questions In case of questions concerning the installation or the use of your product, please With this HELLA product you have opted for a high-quality product with a most up-to-date consult your authorized specialist shop. technology that can nevertheless be easily installed and operated. In these instructions we describe the basic installation, commissioning and use.
  • Page 2: Ce Marking

    CE marking Safety instructions The HELLA concealed awning PM03 (side seam guided) is in compliance with the These installation instructions refer to prefabricated elements, that (1) for declaration of performance according to the Construction Products Regulation; if the unit is...
  • Page 3: Designated Use

    Improper repair works may cause both risk of injury to persons or damage to the units. Repair works must be carried out by a HELLA specialist company or a Preventive measures partner company of HELLA.
  • Page 4: Before Installation

    Installation instructions and Instructions for use Installation instructions and Instructions for use Operating guidelines Before installation Motor drive: Check the product immediately for possible shipping damage and for compliance with the delivery receipt. By activating a switch, a remote control or an automatic device, the roller If parts are missing or damaged, please consult your supplier immediately.
  • Page 5: Part Designation Pm03

    Subject to technical modifications – Date of Issue March/2022 Subject to technical modifications – Date of Issue March/2022 Installation instructions and Instructions for use Installation instructions and Instructions for use Part designation PM03 - Cable guiding Drive duct Check the dimensions of the element and wall opening, and the dimension of the window respectively.
  • Page 6: Manufacturing Of The Duct For Motor Drive

    Installation instructions and Instructions for use Installation instructions and Instructions for use Manufacturing of the duct for motor drive Fixing box Providing a duct in the wall or window frame Fastening without mounting bracket - Provide a duct boring 1. Hold the box profile with the with ø10 mm! bore holes dimensionally correct to the mounting base.
  • Page 7: Installation Of The Cover With Front Rail

    Installation instructions and Instructions for use Installation instructions and Instructions for use Installation of the cover with front rail Installation of the cover with front rail 1. Coil up the cover via the 3. Unwind the cover and front rail to a remainder of check the symmetric approx.
  • Page 8: Installation With Plaster Base And Rear Insulation

    Installation instructions and Instructions for use Installation instructions and Instructions for use Installation with plaster base and rear insulation Activation guidelines for electric drives Installation example The motors we use are drives with integrated planetary gear, brakes, limit stops at the top and at the bottom, and thermo cut-off switches, also not E 115 only a motor, but a complete drive system.
  • Page 9: Commissioning/Functional Check

    Installation instructions and Instructions for use Installation instructions and Instructions for use Connection directives for motor drive Connection directives for motor drive The electrical connection is described in the enclosed instructions of the manufacturer of Directions for radio motors: the motor drive and must be carried out in accordance with these instructions For elero radio-controlled tube motors, the connections no.
  • Page 10: Handing Over Report (For The Fitter)

    Dear Customer, Dear Customer, We are glad that you have opted for a HELLA brand product. Our units are fabricated with We are glad that you have opted for a HELLA brand product. Our units are fabricated with greatest care and many years of experience.

Table of Contents